| |
 New
AMSOIL Saber Outboard Synthetic 2-Cycle Oil is specifically
designed for lean mix ratios in pre-mix applications.
Saber Outboard contains lower temperature dispersants
for water-cooled outboard motors. Extensive testing
shows superior lubricity and cleanliness properties
at lean mix ratios with this premium synthetic formulation.
- Saber Outboard is a very low smoke,
low odor product
- At 100:1, produces 30 percent
lower emissions than oils mixed at 50:1
- One mix ratio for everything eliminates
confusion
- Versatile and very good for
many applications
- Cost effective compared to oils
mixed at 50:1 or richer
- Saber Outboard exhibits low aquatic
toxicity
- Lean mix ratio prevents plug fouling
and exhaust port deposits
PRODUCT DESCRIPTION
AMSOIL Saber Outboard Synthetic 100:1 Pre-Mix 2-Cycle
Oil is formulated with exclusive AMSOIL synthetic
base oils and premium additives. Designed for lean
mix ratios in two-cycle motors, Saber 2-Cycle Oil
has excellent lubricity and cleanliness properties,
controlling friction and preventing wear, plug fouling,
ring sticking and exhaust port blocking. AMSOIL Synthetic
100:1 2-Cycle Oils have been protecting and providing
improved performance in two-cycle motors since 1973.
Saber Outboard
Saber Outboard (ATO) is specifically
designed for outboard motors. It is also very good
for personal watercraft, jet boats, motorcycles, snowmobiles
and ATVs. Saber Outboard contains a heavy dose of
lower temperature dispersant additives that excel
at preventing varnish and deposits from forming in
water-cooled motors. Saber Outboard is a very low
smoke, low odor, low toxicity product that produces
as much as 30 percent fewer emissions at 100:1 mix
ratios than oils mixed at 50:1. It is ideal for trolling
motors as it prevents “oil loading” and plug fouling
for rapid throttle response. Operators and the environment
benefit from the use of Saber Outboard. It is recommended
for pre-mix use where TC-W3 or API TC is specified.
Applications
AMSOIL Saber 100:1 2-Cycle Oil is recommended
for 100:1 mix ratios in normal service and 50:1 to
80:1 mix ratios in severe service applications such
as commercial equipment operations and racing.
|
TYPICAL
TECHNICAL PROPERTIES
|
|
Saber Outboard
Synthetic 100:1 Pre-Mix 2-Cycle Oil
|
|
Kinematic Viscosity
@ 100°C, cSt (ASTM D-445)
|
13.4
|
|
Kinematic Viscosity
@ 40°C, cSt (ASTM D-445)
|
91.3
|
| Viscosity Index (ASTM D-2270) |
148
|
|
Pour Point °C (°F)
(ASTM D 97)
|
-36 (-33)
|
|
Flash Point °C (°F)
(ASTM D 92)
|
102 (216)
|
| Fire Point °C (°F) (ASTM D 92)
|
106 (223)
|
| DANGER: harmful or fatal if swallowed. Contains synthetic lubricant
and petroleum distillates. If swallowed do not
induce vomiting. Contact a physician immediately.
Keep away from fire, heat and open flame. Use
with adequate ventilation. Avoid frequent or
prolonged skin contact. Flush eyes with water
for 15 minutes in case of contact. KEEP
OUT OF REACH OF CHILDREN. |
|
|
